Fox Float Air Sleeve Clamps 2019 onwards 803-01-318

£23.00

Description

These Fox Float X2 air sleeve clamps are manufactured at our workshop in Lancashire and are an aftermarket alternative to Fox part number  803-01-318 (2019 onwards) but not 803-00-968  but we do have both models in aluminium and 3d printed carbon composite in our listings.

You will also need the following items which we have listed too:

9mm Fox Float X2 Clamp
Eyelet torque tool

How are they made?


They are extremely tough, oil and chemical resistant.They are proudly manufactured in Lancashire, England under the brand name Profin Components. They are 3d printed from a high quality carbon fibre/polymer composite.

Are 3d Printed Components Strong Enough for Actual Workshop Use?

All of our 3d printed clamps including this set are! The Machining Industry has been using 3d printed clamps for some time now, so if you can rely on a set holding a part securely enough whilst being machined with a milling cutter they are certainly secure enough for your rear shock or dropper post.

We have been using 3d printed clamps now since mid 2018 for all suspension work in our workshop without a single failure.

In fact just like aluminium clamps, if you wanted to test a set to failure you would find that you will damage and deform the part you are clamping long before the clamps themselves fail. The only sign you would see that the clamps have been used is a light impression of the vice jaws on the rear of the clamp.

In addition to being extremely tough 3d printed clamps have some additional advantages:

The polymer we use has a tremendous amount of “give” and “spring”, meaning the bore of clamp especially will not only match any imperfections in the part you are clamping but it will also return to it’s original shape as soon as it’s released from the vice.

The clamps themselves contain chopped carbon fibre which prevents the part from slipping, once the part has been cleaned and is free of oil, every bit as effective as aluminium.

Although the cost of the filament we use to make these clamps is more expensive per kg than 6082 aluminium alloy there is no waste, parts can be manufactured in one process and the result is the cost to the end consumer is reduced dramatically.

Quality Control

Every single carbon clamp is verified for dimensional accuracy before it is sent out. In addition 1 in every 20 clamp batch is tested to failure, if that part fails before it should then the entire batch will be scrapped. This hasn’t happened yet.

Worldwide shipping available.