Fox DPX FLOAT X Volume Spacers Tokens 803-01-251

£14.00

Description

Fox DPX FLOAT X Volume Spacers

Fox DPX / FLOAT X Volume Spacers aftermarket equivalent to Fox PN 803-01-251 for 1/2″ shaft.

Volume spacers will increase the spring curve of your rear shock making it stiffer at the end of the stroke. This is a great way to keep your shock nice and active at the start of the stoke as you can run lower pressures thereby decreasing breakaway friction and improving small bump compliance. The increased spring curve will help prevent progressing through the travel too quickly and the shock bottoming out.

These parts are 3d printed from a high quality chemical and oil resistant polymer – PETG, which is used for drinks bottles, chemical containers, fuel tanks etc. We do not use PLA in any of our 3d printed products.

These volume spacers are available in 5 sizes the largest is at the top of the list:

Size 5 Largest – 1.02in3 equivalent to Fox pn 233-00-344
Size 4 – 0.86in3 equivalent to Fox pn 233-00-343
Size 3 – 0.6in3 equivalent to Fox pn 233-00-342
Size 2 – 0.4in3 equivalent to Fox pn 233-00-341
Size 1 – 0.2in3 equivalent to Fox pn 233-00-340