Bicycle Service and Repair In Preston Lancashire

We offer three bicycle service packages together with a comprehensive price list in respect of more common works to be carried out. If you require any work on your bike that isn’t listed here please get in touch.

If you are looking to book a service for your MTB forks or rear shock please click here.

Bicycle Service Preston, Bicycle Repair Preston, Bicycle servicing, Lancashire

Standard Bicycle Service – £35

The standard bicycle service is recommended for newer bikes, for bikes with low use or before an event/race.

  • Brake safety check and adjustment.
  • Gear adjustment.
  • Gear hanger straightened where applicable.
  • Seat post removed cleaned and greased where applicable.
  • Drive chain cleaned and lubed.
  • Cranks checked and tightened.
  • Tyres inflated and checked for damage.
  • Please note that labour costs on the replacement of parts or the cost of the parts themselves are not included as part of a standard bicycle service. Any such costs will be agreed with the client before additional works are carried out. Please see the price list below for more information.

Standard Plus Bicycle Service – £70

Assuming that your bike is cleaned and maintained regularly we would recommend that this bicycle service is carried out every 6 months.

  • Seat post removed, cleaned and greased where applicable.
  • Drive chain and wheels removed, degreased and cleaned.
  • Full frame clean with wheels and drive train removed.
  • Frame checked for damaged and then polished.
  • Drivetrain re-fitted and re-lubed.
  • Wheels trued.
  • Tyres inflated and checked for damage.
  • Brake safety check and adjustment.
  • Gear adjustment.
  • Gear hanger straightened where applicable.
  • All bolts checked and tightened to the correct torque.
  • Please note that labour costs on the replacement of parts or the cost of the parts themselves are not included as part of a standard plus bicycle service. Any such costs will be agreed with the client before additional works are carried out. Please see the price list below for more information.

Premier Bicycle Service – £110

For high mileage bikes, before a big event or a holiday or as an annual service to give you pride and joy that new bike feeling.

  • Seat post removed, cleaned and greased where applicable.
  • Complete strip down of the entire bike to a bare frame.
  • Frame polished and checked for cracks.
  • All components fully degreased, cleaned, re-lubed and refitted.
  • Wheels trued.
  • Tyres inflated and checked for damage.
  • Replacement of inner and outer gear cables.
  • Gear adjustment.
  • Gear hanger straightened where applicable.
  • Bottom Bracket removed and threads cleaned/re-greased (except Press-fit).
  • Front and rear hub service.
  • All bolts checked and tightened to the correct torque.
  • Hydraulic brakes bled – brake cable replacement (inner and ourter) an additional £7 per brake.
  • Please note that with the Premier Bicycle Service there are no additional labour costs for the replacement of parts (excluding frame bearing replacement for full suspension bikes). Replacement parts themselves will incur additional charges, but will be agreed with the client before any additional work is carried out.

Bicycle Service Preston, Bicycle Repair Preston, Bicycle servicing, Lancashire

OTHER SERVICES:

If you cannot see a job you want on the list, it doesn’t mean we don’t do it, please get in touch for a quote. These prices represent average estimated costs and may be subject to change if excessive extra time is required to complete a service or repair, you will always receive a call before prices increase. The following prices are labour only, unless otherwise specified.

If you select more than one job we may revert to our hourly rate for pricing (£40 per hour) if this will be cheaper for you. For example if you wanted a headset fit, cassette change and a wheel trued the total price for labour would be £43 maximum, however if we can finish the work in 1 hour you would only pay £40. Time is billed in 15 minute units.

P.D.I (Pre-Delivery Inspection):

  • Already assembled brand new bike – From £30
  • Building a brand new bike from a box – From £40

Bike Builds / Frame Swap:

  • Mechanical Groupset build – £90
  • EPS or Shimano Di2 Groupset build – £110
  • TT or Triathlon Bike build – £150

Often with a frame swap, things like seat post, seat clamp and front derailleur may have to be replaced due to differing sizes of seat tubes. If existing components are being used, they will be fully de-greased before re-fitting.

Tyre/Tube Services:

  • Puncture repair on derailleur gearing – £10
  • Puncture repair on hub gearing – £12
  • Puncture repair on drum brakes or enclosed chain – £15

The above prices are for the cost of a patch repair, if a replacement tube is required this will be an additional cost.

Wheel Services:

  • Wheel True and Dish – £18
  • Wheel Build – £30
  • Hub Service – £15
  • Tubeless conversion -£18 (labour per wheel, does not include rim tape, valves or sealant)

Brake Services:

  • Brake adjust (per brake) – £10
  • Cable fit (per brake, includes alignment) – £15
  • Bleed and setup hydraulic disc brake (per brake) – £15
  • Assemble/trim hoses on hydraulic brakes and bleed – £20

Gear Services:

  • Mech adjustment (per mech) – £10
  • Mech Fit (per mech, includes adjustment) – £10
  • Chain Fit – £10
  • Cassette Swap/Fit – £10
  • Gear Cable Fit (per mech, includes indexing) – £15
  • Bottom Bracket Fit – £15
  • Bottom bracket shell tapping – £20
  • Bottom bracket shell facing – £15

Handlebar/Cockpit Services:

  • Headset Fit – £15
  • Headset Service – £15
  • Handlebar Fit (includes fitting tape) – £15
  • Handlebar Tape Fit – £10
  • Stem swap – £10
  • Steerer tube cut (includes headset service) – £25

Insurance Valuation (including print-out) – £25
Minimum Labour Charge – £10
Hourly Rate for Workshop Labour – £40